Where do I get the material?
Steelworks
- 2pcs. bolt M3x10 with thread to head, hex or Allen or Philips or cheese head
- 4pcs. nut M3
- 4pcs. nut M4, brass. Zinc plated with 20min. time penalty.
- About 2.5 dm^2 of tin plated steel sheet, 0.15-0.35 mm thick.
Chemistry
- Glue for sticking paper on metal
Electrician
- 60cm shielded stranded single-conductor with solderable shield
Electronics
- Solder
- rosin
flux
- 1pc 90x67x22mm metal can from tin-plated steel sheet
- 3x Cable grommets 6mm inner dia., for 8mm hole
- The following components
(separate partlists).
Use only new components, not desoldered ones:
| Device |
Package |
Value |
Quantity |
Order No. Distrelec |
Price Distrelec [CHF incl. VAT] |
Order No. GM |
Price GM [CZK incl. VAT] |
|---|
| |
|
|
|
www.distrelec.com |
|
www.gme.cz |
|
|---|
| 1N5408 | | | 1 | 600210 |
0.75 |
221-001 |
1.9 |
| 2N3904 | TO92 | | 2 | 612753 |
0.43 |
215-003 |
1.5 |
| BAT46 | | | 2 | 601486 |
0.54 |
223-006 |
2.9 |
| BF908 | | | 1 | 611717 |
0.81 |
212-009 |
13.3 |
| BPW43 | | | 1 | 631712 |
1.83 |
520-024 |
20 |
| CAPACITOR | ceramic 50V | 47p | 1 | 830328 |
0.22 |
120-141 |
1.5 |
| CAPACITOR | ceramic 50V | 270p | 1 | 830336 |
0.38 |
120-033 |
1.5 |
| CAPACITOR | ceramic 50V | 1n | 2 | 830258 |
0.32 |
120-168 |
1 |
| CAPACITOR | ceramic 50V | 2.2n | 3 | 830348 |
0.32 |
120-046 |
1.5 |
| CAPACITOR | ceramic 50V | 3.3n | 1 | 830264 |
0.32 |
120-048 |
1.5 |
| CAPACITOR | ceramic 50V | 10n | 7 | 831591 |
0.48 |
120-251 |
1.5 |
| CAPACITOR | ceramic 50V | 100n | 10 | 830284 |
0.32 |
120-060 |
1 |
| CAPACITOR | ceramic 50V | 220n | 3 | 831616 |
0.75 |
120-062 |
3 |
| NE592 | DIL14 | | 1 | |
|
393-010 |
15.01 |
| POLARIZED_CAPACITOR | | 100u/16V | 1 | 802300 |
0.7 |
123-476 |
1 |
| RESISTOR | 250mW pref. metallic | 12 | 1 | 714029 |
0.19 |
110-027 |
1 |
| RESISTOR | 250mW pref. metallic | 18 | 2 | 714038 |
0.19 |
110-031 |
1 |
| RESISTOR | 250mW pref. metallic | 22 | 1 | 714041 |
0.19 |
110-033 |
1 |
| RESISTOR | 250mW pref. metallic | 75 | 1 | 714054 |
0.15 |
110-046 |
1 |
| RESISTOR | 250mW pref. metallic | 180 | 1 | 714071 |
0.14 |
110-055 |
1 |
| RESISTOR | 250mW pref. metallic | 220 | 1 | 714073 |
0.14 |
110-057 |
1 |
| RESISTOR | 250mW pref. metallic | 270 | 2 | 714075 |
0.14 |
110-059 |
1 |
| RESISTOR | 250mW pref. metallic | 330 | 1 | 714077 |
0.14 |
110-061 |
1 |
| RESISTOR | 250mW pref. metallic | 390 | 1 | 714079 |
0.14 |
110-063 |
1 |
| RESISTOR | 250mW pref. metallic | 470 | 1 | 714081 |
0.14 |
110-065 |
1 |
| RESISTOR | 250mW pref. metallic | 560 | 2 | 714083 |
0.14 |
110-067 |
1 |
| RESISTOR | 250mW pref. metallic | 680 | 3 | 714085 |
0.14 |
110-069 |
1 |
| RESISTOR | 250mW pref. metallic | 820 | 1 | 714087 |
0.14 |
110-071 |
1 |
| RESISTOR | 250mW pref. metallic | 1k | 5 | 714089 |
0.14 |
110-073 |
1 |
| RESISTOR | 250mW pref. metallic | 1.2k | 1 | 714091 |
0.14 |
110-075 |
1 |
| RESISTOR | 250mW pref. metallic | 1.5k | 1 | 714094 |
0.14 |
110-077 |
1 |
| RESISTOR | 250mW pref. metallic | 1.8k | 1 | 714096 |
0.14 |
110-079 |
1 |
| RESISTOR | 250mW pref. metallic | 6.8k | 4 | 714111 |
0.14 |
110-093 |
1 |
| RESISTOR | 250mW pref. metallic | 82k | 2 | 714146 |
0.14 |
110-119 |
1 |
| RESISTOR | 250mW pref. metallic | 100k | 3 | 714148 |
0.14 |
110-121 |
1 |
| RESISTOR | 250mW pref. metallic | 120k | 1 | 714153 |
0.14 |
110-123 |
1 |
| RESISTOR | 250mW pref. metallic | 180k | 1 | 714162 |
0.14 |
110-127 |
1 |
| RESISTOR | 250mW pref. metallic | 2.2M | 1 | 714188 |
0.19 |
110-153 |
1 |
| Total: |
75 |
Price Distrelec [CHF incl. VAT] |
"22.94" |
Price GM [CZK incl. VAT] |
"138.51" |
| Equivalents (most preferred come first) |
| BPW43 | SFH203, SFH2030 (for SFH203 and 2030, not the P and F
suffixes!), BPV10 without F suffix (slightly worse), OP905 (3mm package, requires
drilling smaller hole, degraded performace may occur depending on lens quality), Hamamatsu S6436 (expect
degraded performance) |
| BF908 | KF907, BF988, BF998 (BF988 in SMD), BF982, BF992 (BF982 in SMD), BF961, BF960 |
| NE592_DIL14 | TL592 DIL 14, uA733 DIL14 (NE592 equivalent), SA592 DIL 14, SE592 DIL 14, LM592 DIL 14, uA592 DIL 14,
NTE927D (DIL 14), NTE927 (can use only if you can understand the NE592 and NTE927 datasheets to reassign the pins (14->10) and reorient the chip properly
in relation to signal travel direction),
uA733 TO-5-10 (metal can with
10 pins) . Do not use anything in plastic 8-pin or 10-pin package -- problems
with stability! With TL592, connect pins 3 and 12 to ground. |
| BAT46 | BAT42, BAT43, BAT 48, BAT 47. Not BAT 49! |
| 75 Ohm resistor | 68 Ohm resistor
|
| 1.5uH coil | 1uH coil
|
| 2N3904 | MMBT3904 (2N3904 in SOT-23 case), PZT3904 (2N3904 in SOT-223 case), 2N2369A, 2N2369, 2N2222, BC547C, BC547B, BC547A, BC547 |
| 10_turns_on_8mm | Make from insulated copper wire of 0.5mm^2...1mm^2 crosssection. Can be replaced with 1uH factory-made coil. However must be rated on at least the current the power source gives when shorted.
|
Household
- Rag for cleaning soldering iron or old paper
Contact, support: Clock
on the Internet Relay Chat.© 1998-2016 Karel ‘Clock’ Kulhavý et al..