Where do I get the material?
Tin
- 0.1m^2 of tin-plate, 0.15-0.35mm thick.
Chemistry
- Water-soluble glue for sticking paper on metal
- Possibly silicon sealant when thermal glue gun is not available
- 0.2l of isopropyl acohol (recommended)
Electrician
- 2.5mm^2 solid copper wire, 20cm
- 1.5mm^2 solid copper wire, 20cm
Household stuff
- Old but clean toothbrush
- A rag for cleaning soldering iron
Electronics
- Solder, preferrably lead-free
- rosin
flux
- 2m of flexible (stranded) STP cable. Best is to buy 2m straight (not
crossed) patch cable and cut in half. Otherwise RJ45 plug (for stranded
cables - there are two different types or RJ45 plugs!), connector
jacket and
- Distance piece for LED, straight, 10mm, 3 pcs.
- The following electronic components
(separate parlists).
Use new components, not desoldered:
| Device |
Package |
Value |
Quantity |
Order No. Distrelec |
Price Distrelec [CHF incl. VAT] |
Order No. GM |
Price GM [CZK incl. VAT] |
|---|
| |
|
|
|
www.distrelec.com |
|
www.gme.cz |
|
|---|
| 74HC00 | SMD | | 2 | |
|
|
|
| 74HC04 | SMD | | 1 | |
|
|
|
| 74HC133 | DIL | | 2 | 647686 |
0.54 |
425-033 |
4.61 |
| 74HC164 | SMD | | 5 | |
|
|
|
| 74HC32 | SMD | | 1 | |
|
|
|
| 74HC4040 | SMD | | 2 | |
|
|
|
| 74HC93 | SMD | | 1 | |
|
|
|
| 74HCT14 | SMD | | 1 | |
|
|
|
| CAPACITOR | SMD 0805 | 22p | 2 | 830734 |
0.05 |
906-079 |
2.5 |
| CAPACITOR | SMD 0805 | 10n | 4 | 830664 |
0.09 |
906-089 |
2.5 |
| CAPACITOR | SMD 1206 | 100n | 18 | 831469 |
0.22 |
905-081 |
2.5 |
| CAPACITOR | SMD 1206 | 1u/25V | 7 | |
|
|
|
| CAPACITOR | SMD 1210 | 220n | 3 | 830688 |
0.71 |
905-131 |
2 |
| CM322522 | SMD 1206 | 47nH | 2 | 353084 |
0.97 |
965-101 |
13.99 |
| COIL | SMD 6.5mm square | 33uH/0.32A/0.25Ohm | 1 | 350592 |
1.61 |
965-039 |
6.5 |
| COIL | SMD 7.6mm square | 100uH/0.32A/0.6Ohm | 1 | 350193 |
2.69 |
965-042 |
7.5 |
| CRYSTAL OSCILLATOR | DIL 14 | 16MHz | 1 | 335015 |
3.12 |
132-021 |
95 |
| DB9 | male 90deg PCB | | 3 | 120158 and 125115 |
6.24 |
801-037 |
9 |
| DS26LS31 | DIL | | 1 | 641808 |
1.61 |
433-001 |
18.4 |
| DS26LS32 | DIL | | 1 | 645826 |
2.15 |
433-002 |
16.51 |
| LED | 5mm diffuse | Green | 1 | 251536 |
0.43 |
511-060 |
2.5 |
| LED | 5mm diffuse | Red | 1 | 251534 |
0.7 |
511-409 |
1 |
| LED | 5mm diffuse | Yellow | 1 | 251532 |
0.43 |
511-091 |
1.2 |
| LM2671M-5.0 | SO-8 | | 1 | 648500 |
7.53 |
|
|
| POLARIZED_CAPACITOR | SMD Chip D low ESR | 100u/10V | 1 | 811025 |
2.15 |
907-126 |
9.5 |
| POLARIZED_CAPACITOR | SMD Chip E low ESR | 100u/16V | 1 | 811030 |
2.37 |
907-116 |
10 |
| POLARIZED_CAPACITOR | SMD Tantal D | 5u/16V | 1 | 812217 |
1.61 |
907-073 |
8 |
| RESISTOR | SMD 1206 | 12 | 2 | 711269 |
0.07 |
900-321 |
1.999 |
| RESISTOR | SMD 1206 | 39 | 2 | 711275 |
0.07 |
900-097 |
2 |
| RESISTOR | SMD 1206 | 82 | 1 | 711279 |
0.07 |
900-163 |
2 |
| RESISTOR | SMD 1206 | 100 | 5 | 711280 |
0.07 |
900-192 |
2 |
| RESISTOR | SMD 1206 | 220 | 3 | 711284 |
0.07 |
900-295 |
2 |
| RESISTOR | SMD 1206 | 330 | 3 | 711286 |
0.07 |
900-356 |
1 |
| RESISTOR | SMD 1206 | 1.2k | 2 | 711293 |
0.07 |
900-274 |
2 |
| SK36 | SMD | | 2 | 600728 |
0.65 |
920-106 |
8 |
| eledis_1A21-NF1PCAE | 6mm hole | gold-plated | 2 | 202167 |
2.8 |
631-236 |
18.01 |
| Total: |
88 |
Price Distrelec [CHF incl. VAT] |
"62.85" |
Price GM [CZK incl. VAT] |
"391.328" |
| Equivalents (most preferred come first) |
| 74HC... | SN74HC..., MM74HC... |
| RESISTOR SMD 1206 | RESISTOR SMD 0805 |
| 74HC04 | 74HCT04 |
| 74HC93 | 74HCT93 |
| 74HC133 | 74HCT133 |
| 74HC164 | 74HCT164 |
| 74HC4040 | 74HCT4040 |
| DS26LS31 | AM26LS31, AM26C31, DS26C31, QP26LS31, 26LS31 |
| DS26LS32 | AM26LS32A, AM26C32, DS26C32, QP26LS32, 75173. Not
AM26LS32! |
| LM2671-5.0 | LM2674-5.0 |
| Crystal oscillator 16MHz DIL14 | Crystal oscillator 16MHz DIL8 5V or crystal oscillator SMD 16 MHz 5V. Must be a
"Crystal Oscillator" which is rectangular and has 4 pins. Do not buy "Resonator"
which has 3 pins or "Crystal" which has 2 pins. Do not buy crystal oscillator for 3.3 V!
|
| CM322522 47nH | SMD 1206 sized 47nH coil rated 450mA or more
with resistance 0.2Ohm or less. |
| eledis_1A21-NF1PCAE | Any other switch DPDT ON-ON which fits
into the holes on PCB (they are bigger than necessary), is for 6mm hole and is
not too big to have problem with the neighbouring switch or is not too high for
the lid. |
| SK36 | Other SMD Schottky 3A diode |
| Capacitor 1u/25V SMD 1206 | Any other SMD ceramic capacitor 1u, at least 25V,
up to SMD 2220 size. If it's too small to be soldered, help yourself with a
nibble of wire. Do not use SMD electrolytic here! |
Contact, support: Clock
on the Internet Relay Chat.© 1998-2016 Karel ‘Clock’ Kulhavý et al..