Where do I get the material?
Steelworks
Sections
- 1pc. 103mm of 20x20x3 steel L-section (as a helper for bending tin)
- 1pc. 160mm of 20x20x3 steel L-section
Tin
- 0.1m^2 of tinned steel plate, 0.15-0.35mm thick.
2 pieces: 260x203mm and 180x123mm.
Nuts and bolts
- Bolt M3x15 or longer, 5pcs. Cheese or Philips or hex or Allen head. Zinc-plated or black.
- Bolt M3x6 or longer, 1pc., hex or Allen or Philips or cheese head, zinc-plated.
- Bolt M4x6 or longer, 10pcs., hex or Allen head, with thread to head.
- Bolt M4x20 or longer, 4pcs., hex or Allen head, with thread to head.
- Nut M3, 6pcs., zinc-plated or black.
- Nut M4, 22pcs., zinc-plated
- Washer, M3, 6 pcs, galvanized.
- Washer M4, 4pcs., galvanized
- Spring washer M4, 8pcs., galvanized or black,
- Toothed spring washer M3 (3.2mm), 1pc., galvanized.
Chemistry
- Water-soluble glue for sticking paper on metal
- Possibly silicon sealant when thermal glue gun is not available
- PCB only: 0.2l of isopropyl acohol (only recommended)
- A liquid for soldering on steel, if the tin is steel (both zinc-plated
and unplated). Can be replaced by zinc cloride prepared by dissolving little
pieces of zinc (not zinc-plated steel, but zinc!) in hydrochloric acid (HCl).
- If the tin is steel and rusty, a rust-remover or emery paper or even better
both.
Electrician
- 0.5m of 1mm^2 insulated hard copper wire.
- 6-terminal terminal block for 4mm^2 wire.
![Gallery[1165]](http://images.twibright.com/tns/lvl0/1165.jpg)
Household stuff
- Old but clean toothbrush
- A rag for cleaning soldering iron
Electronics
- Solder
- rosin
flux
- 1m of flexible (stranded) STP cable. Best is to buy 2m straight (not
crossed) patch cable and cut in half. Otherwise RJ45 plug (for stranded
cables - there are two different types or RJ45 plugs!), connector
jacket and
a stranded STP cable. If you cannot get STP, take UTP.
- 3pcs. Cable grommets 4mm inner, 6mm hole diameter
- 6pcs. Cable grommets 6mm inner, 8mm outer diameter
- The following electronic components
(separate parlists).
Use new components, not desoldered:
| Device |
Package |
Value |
Quantity |
Order No. Distrelec |
Price Distrelec [CHF incl. VAT] |
Order No. GM |
Price GM [CZK incl. VAT] |
|---|
| |
|
|
|
www.distrelec.com |
|
www.gme.cz |
|
|---|
| 1N5408 | | | 1 | 600210 |
0.75 |
221-001 |
1.9 |
| 74HC00 | DIL | | 2 | 647652 |
0.48 |
425-001 |
8 |
| 74HC04 | DIL | | 1 | 647658 |
0.43 |
425-004 |
8 |
| 74HC133 | DIL | | 2 | 647686 |
0.54 |
425-033 |
4.61 |
| 74HC164 | DIL | | 5 | 647715 |
0.65 |
425-047 |
9 |
| 74HC32 | DIL | | 1 | 647782 |
0.48 |
425-014 |
5 |
| 74HC4040 | DIL | | 2 | 642956 |
1.08 |
425-111 |
8 |
| 74HC93 | DIL | | 1 | |
|
425-024 |
16.51 |
| 74HCT14 | DIL | | 1 | 649660 |
0.65 |
426-008 |
4 |
| CAPACITOR | ceramic 50V, rm 5mm | 22p | 2 | 830324 |
0.22 |
120-180 |
1 |
| CAPACITOR | ceramic 50V, rm 5mm | 1n | 19 | |
|
120-168 |
1 |
| CAPACITOR | ceramic 50V, rm 5mm | 10n | 7 | 831591 |
0.48 |
120-251 |
1.5 |
| CAPACITOR | ceramic 50V, rm 5mm | 100n | 24 | |
|
120-060 |
1 |
| CAPACITOR | ceramic 50V, rm 5mm | 220n | 4 | 831616 |
0.75 |
120-062 |
3 |
| CRYSTAL OSCILLATOR | DIL 14 | 16MHz | 1 | 335015 |
3.12 |
132-021 |
95 |
| DC_power_central_pin_female | panel | 2.5mm | 1 | |
|
806-019 |
20 |
| DS26LS31 | DIL | | 1 | 641808 |
1.61 |
433-001 |
18.4 |
| DS26LS32 | DIL | | 1 | 645826 |
2.15 |
433-002 |
16.51 |
| HEADER_FEMALE | gold-plated | 2.54mm 6-way 2-row | 2 | 122343 |
1.61 |
832-069 |
7 |
| HEADER_FEMALE | gold-plated with key | 2.54mm 2-way | 4 | 114600 |
0.7 |
800-084 and 2x800-162 |
1.5 |
| HEADER_FEMALE | gold-plated with key | 2.54mm 3-way | 1 | 114602 |
0.75 |
800-085 and 3x800-162 |
2.5 |
| HEADER_FEMALE | gold-plated with key | 2.54mm 4-way 1-row | 2 | 114604 |
0.86 |
800-086 and 4x800-162 |
3 |
| HEADER_VERTICAL | gold-plated | 2.54mm 6-way 2-row | 2 | 122361 |
0.97 |
832-023 |
4 |
| HEADER_VERTICAL | gold-plated with key | 2.54mm 2-way | 4 | 114620 |
0.91 |
800-163 |
1 |
| HEADER_VERTICAL | gold-plated with key | 2.54mm 3-way | 1 | 114622 |
1.08 |
800-164 |
1.5 |
| HEADER_VERTICAL | gold-plated with key | 2.54mm 4-way 1-row | 2 | 114624 |
1.29 |
800-170 |
2 |
| LED | 5mm diffuse | Green | 1 | 251536 |
0.43 |
511-060 |
2.5 |
| LED | 5mm diffuse | Red | 1 | 251534 |
0.7 |
511-409 |
1 |
| LED | 5mm diffuse | Yellow | 1 | 251532 |
0.43 |
511-091 |
1.2 |
| LM7805 | | | 1 | 647310 |
0.86 |
330-001 |
7.5 |
| POLARIZED_CAPACITOR | miniature | 100u/10V | 1 | 800463 |
0.27 |
123-110 |
1 |
| POLARIZED_CAPACITOR | miniature | 100u/16V | 1 | 800476 |
0.27 |
123-113 |
1 |
| RESISTOR | 250mW pref. metallic | 3.3 | 1 | 714012 |
0.22 |
110-013 |
1 |
| RESISTOR | 250mW pref. metallic | 12 | 2 | 714029 |
0.19 |
110-027 |
1 |
| RESISTOR | 250mW pref. metallic | 39 | 2 | 714047 |
0.19 |
110-039 |
1 |
| RESISTOR | 250mW pref. metallic | 82 | 1 | 714055 |
0.15 |
110-047 |
1 |
| RESISTOR | 250mW pref. metallic | 100 | 5 | 714057 |
0.15 |
110-049 |
1 |
| RESISTOR | 250mW pref. metallic | 220 | 3 | 714073 |
0.14 |
110-057 |
1 |
| RESISTOR | 250mW pref. metallic | 330 | 2 | 714077 |
0.14 |
110-061 |
1 |
| RESISTOR | 250mW pref. metallic | 1k | 1 | 714089 |
0.14 |
110-073 |
1 |
| RESISTOR | 250mW pref. metallic | 1.2k | 2 | 714091 |
0.14 |
110-075 |
1 |
| RJ45 | jack with jacket | | 1 | 675581 and 675581 |
2.9 |
833-053 and 833-055 |
13.5 |
| Switch DPDT ON-ON | 6mm hole | gold-plated | 2 | 202167 |
2.8 |
631-034 |
20 |
| Total: |
122 |
Price Distrelec [CHF incl. VAT] |
"55.63" |
Price GM [CZK incl. VAT] |
"471.74" |
| Equivalents (most preferred come first) |
| 74HC04 | 74HCT04
|
| 74HC93 | 74HCT93
|
| 74HC133 | 74HCT133
|
| 74HC164 | 74HCT164
|
| 74HC4040 | 74HCT4040
|
| DS26LS31 | AM26LS31, AM26C31, DS26C31, QP26LS31, 26LS31
|
| DS26LS32 | AM26LS32A, AM26C32, DS26C32, QP26LS32, 75173. Not
AM26LS32!
|
| 2-pole_switch_gold_plated_6mm_hole | 2 jumpers however for reconfiguration from PC to switch the lid will have to be unscrewed and screwed back (lengthy :( ).
|
| Crystal oscillator 16MHz DIL14 | Crystal oscillator 16MHz DIL8 5V or crystal oscillator SMD 16 MHz 5V. Must be a
"Crystal Oscillator" which is rectangular and has 4 pins. Do not buy "Resonator"
which has 3 pins or "Crystal" which has 2 pins. Do not buy crystal oscillator for 3.3 V!
|
| 74HC... | SN74HC..., MM74HC... |
| LM7805 | LM78M05, L78M05, uA78M05, MA7805, 7805 |
| 10_turns_on_8mm | Make from insulated copper wire of 0.5mm^2...1mm^2 crosssection. Can be replaced with 1uH factory-made coil. However must be rated on at least the current the power source gives when shorted.
|
Contact, support: Clock
on the Internet Relay Chat.© 1998-2016 Karel ‘Clock’ Kulhavý et al..