Measuring tools
Working tools
- Electric drill up to 8.5mm (airwire variant) or 10mm (PCB variant) drill bit diameter
- HSS drill bits: 3.3mm, 3.5mm, 4.1mm, 8.5mm (airwire), 10mm (PCB)
- Soldering iron
- Tin shears
- Thermal glue gun
Mounting tools
- A flat screwdriver for M4 bolts (if cheese heads are used) or a 7mm wrench for hex heads.
- A flat screwdriver for M3 bolts (if heads are cheese) or a 5.5mm wrench
for hex heads.
- A flat screwdriver
- 7mm wrench for M4 nuts
- 5.5mm wrench for M3 nuts
- A forceps (PCB variant only)
Chemist tools
- Plastic tray. No kitchenware! For PCB variant only.
Contact, support: Clock
on the Internet Relay Chat.© 1998-2016 Karel ‘Clock’ Kulhavý et al..