Ronja Twibright Labs

Building Tetrapolis Power Source

Building Ronja Tetrapolis Power Source / Ronja Inferno Power Source

Getting Bare Wires

Cut off the original connector from the power source, if applicable. Strip the wires in 3mm length and cover them with solder.

Drawing
  PostScriptPostScript + Gzip PDF
Color Dark power_pinout_01.ps power_pinout_01.ps.gz power_pinout_01.pdf
Light power_pinout_00.ps power_pinout_00.ps.gz power_pinout_00.pdf
Small power_pinout_02.ps power_pinout_02.ps.gz power_pinout_02.pdf
B/W Dark power_pinout_11.ps power_pinout_11.ps.gz power_pinout_11.pdf
Light power_pinout_10.ps power_pinout_10.ps.gz power_pinout_10.pdf
Small power_pinout_12.ps power_pinout_12.ps.gz power_pinout_12.pdf
power_pinout.sch (gschem) Component lists Seznamy součástek

Soldering the connector

Solder the DE9 connector according to this pinout.

When soldering pins together make sure the wire will not touch the enclosure if the enclosure is metallic. When soldering the wire to the shell make sure it will be possible to close down the enclosure.

Assembly

Install the connector enclosure while watching if the wires are not going to touch the metal.

An expected information missing here?