Stray component values

Gallery[17c0]

Inductance

SMD capacitor inductance according to Jeffrey Cain, PhD. (AVX Corporation): Parasitic Inductance of Multilayer Ceramic Capacitors
Chip style	L/W	L [mil]	Fit ind. [pH]	measured ind. [pH]
1210	1.2	12	1010	980
1206	2	12	1255	1250
0805	1.6	8	920	1050
0603	2	6	925	870
0612	0.5	6	615	610
0608	0.625	5	605	600

Capacitor inductance according to Murata: Caracteristics of Capacitors
Type of Capacitor	Residual inductance (ESL) [nH]
Leaded disc ceramic (10nF)	3.0
Leaded disc ceramic (100nF)	2.6
Leaded monolithic ceramic (10nF)	1.6
Leaded monolithic ceramic (100nF)	1.9
Chip monolithic ceramic (10nF, Size: 2.0x1.25x0.6mm)	0.7
Chip monolithic ceramic (100nF, Size: 2.0x1.25x0.85mm))	0.9
Chip aluminium electrolytic (47uF, Size:8.4x8.3x6.3mm)	6.8
Chip tantalum electrolytic (47uF, Size: 5.8x4.6x3.2mm)	3.4

PCB trace inductance Tektronix rule of thumb: 1mm=1nH.

Resistance

5mOhm typical 2.2-4.7uF ceramic
1nF, 10nF, 100nF, 1uF
Wikipedia: 22uF, 100uF
VENT -40+85degC HLC 470uF/16V 12x8mm 450mOhm. 2 pieces measured with Smart Tweezer @100 Hz
VENT or RIFEKING -40+85degC 03-01 1000uF/25V 130mOhm. 2 piece measured with Smart Tweezer @100 Hz

Capacitance

0303 resistor has stray capacitance <200fF
Axial lead 0.35pF, SMD 0603 0.2pF
Twibright Labs measurement 10M TMD resistor with Smart Tweezer. 20 measurements of empty tweezer (1.50185714pF), 20 measurements of the resistor. Original leads: 372fF, short cut leads (3mm each side): 313fF. Both valuse +/-9.5fF (three sigma), assumed normal distribution

An expected information missing here?