Measuring tools
- Ruler
- Hard-metal tip stylus or awl
- Slide gauge (recommended)
- Square (recommended)
Working tools
- Electric drill up to 8.5mm drill bit diameter
- HSS drill bits: 3.3mm, 4.1mm, 5mm, 8.5mm
- Soldering iron
- Tin shears
Mounting tools
- A flat screwdriver for M4 bolts (if cheese heads are used) or a 7mm wrench for hex heads
- A flat screwdriver for M3 bolts (if heads are cheese) or a 5.5mm wrench for hex heads
- A flat screwdriver
- 7mm wrench for M4 nuts
- 5.5mm wrench for M3 nuts
Contact, support: Clock
on the Internet Relay Chat.© 1998-2016 Karel ‘Clock’ Kulhavý et al..