Material for Ronja Nebulus

• Home
• About
• Models
• Glossary
• Bugs and Sources
• Donors
• FAQ

Ronja Nebulus

Where do I get the material?

Nuts and bolts

• 1pc. bolt M3x6, galvanized, hex or Allen or Philips or cheese head
• 2pcs. bolt M3x10, with thread up to the head, hex or Allen or Philips or cheese head.
• 4pcs. bolt M4x35, galvanized, thread up to the head, hex or Allen head
• 5pcs. nut M3, galvanized
• 16pcs. nut M4, galvanized
• 4pc. washer M4 (4.3mm) galvanized
• 1pc. toothed spring washer M3 (3.2mm), galvanized

Chemistry

• Glue for sticking paper on metal

Electrician

• 0.5m of 1mm^2 insulated hard copper wire.
• 20cm double-conductor cord stranded 1.5mm^2 each conductor
• 20cm shielded stranded single-conductor with solderable shield

Electronics

• Solder
• rosin flux
• 1pc. 90x67x22mm tin-plated tin shielding tin
• insulating pad for BC139 transistor
• 2pcs. cable grommet 6mm inner dia., for 8mm hole
• Nonconductive thermal paste (for mounting semiconductors on coolers)
• The following components (separate component lists). Use only new components, not desoldered ones:

  Device	Package	Value	Quantity	Order No. Distrelec	Price Distrelec [CHF incl. VAT]	Order No. GM	Price GM [CZK incl. VAT]
  				www.distrelec.com		www.gme.cz
  1N5408			1	600210	0.75	221-001	1.9
  2N3904			2	612753	0.43	215-003	1.5
  74AC04	DIL		3
  BC547			2	610008	0.48	210-027	1
  BD139			1	612479	2.15	211-210	2.9
  CAPACITOR	ceramic 50V	1n	9	830258	0.32	120-168	1
  CAPACITOR	ceramic 50V	10n	4	831591	0.48	120-251	1.5
  CAPACITOR	ceramic 50V	22n	6	830300	0.27	120-055	2
  CAPACITOR	ceramic 50V	100n	14	830284	0.32	120-060	1
  HSDL4230			1	630420	2.69	511-149	27
  POLARIZED_CAPACITOR		10u/10V	2	802300	0.7	123-509	1
  POLARIZED_CAPACITOR		100u/10V	1	800463	0.27	123-110	1
  POLARIZED_CAPACITOR		470u/16V	1	800466	0.65	123-499	2
  RESISTOR	250mW pref. metallic	6.8	2	711620	0.11	110-021	1
  RESISTOR	250mW pref. metallic	27	2	711643	0.11	110-035	1
  RESISTOR	250mW pref. metallic	82	1	714055	0.15	110-047	1
  RESISTOR	250mW pref. metallic	330	1	714077	0.14	110-061	1
  RESISTOR	250mW pref. metallic	820	1	714087	0.14	110-071	1
  RESISTOR	250mW pref. metallic	1k	3	714089	0.14	110-073	1
  RESISTOR	250mW pref. metallic	10k	1	711718	0.11	110-097	1
  RESISTOR	250mW pref. metallic	27k	1	711738	0.11	110-107	1
  RESISTOR	250mW pref. metallic	33k	1	711740	0.11	110-109	1
  RESISTOR	250mW pref. metallic	39k	1	711742	0.11	110-111	1
  RESISTOR	250mW pref. metallic	47k	2	711744	0.11	110-113	1
  RESISTOR	250mW pref. metallic	56k	1	711746	0.11	110-115	1
  RESISTOR	250mW pref. metallic	100k	1	714148	0.14	110-121	1
  ZENER		7.5V	1	600776	0.27	222-022	1
  Total:			66	Price Distrelec [CHF incl. VAT]	"23.1"	Price GM [CZK incl. VAT]	"101.8"

  Equivalents (most preferred come first)
  HSDL-4230	HSDL-4220. Choose optimum LED according to this table: Loupe lens diameter (these lenses were measured) Optimum LED 60 mm HSDL-4220 75 mm HSDL-4220 80 mm HSDL-4220 90 mm HSDL-4230 100 mm HSDL-4220 130 mm HSDL-4230 How to tell HSDL4220 from HSDL4230: >> More...
  74HC...	SN74HC..., MM74HC...
  2N3904	MMBT3904 (2N3904 in SOT-23 case), PZT3904 (2N3904 in SOT-223 case), 2N2369A, 2N2369, 2N2222, BC547C, BC547B, BC547A, BC547
  10_turns_on_8mm	Make from insulated copper wire of 0.5mm^2...1mm^2 crosssection. Can be replaced with 1uH factory-made coil. However must be rated on at least the current the power source gives when shorted.

Contact, support: Clock on the Internet Relay Chat.© 1998-2016 Karel ‘Clock’ Kulhavý et al..