Tools needed for Ronja Led Holder
Measuring tools
These measuring tools are necessary only if you are not using drilling
template building option.
- Ruler
- Slide gauge (only recommended)
- Square (only recommended)
The following tools are necessary in any case:
- Hard-metal tip stylus or awl
Working tools
- Electric drill with chuck that can hold 10mm diameter drill bit
- HSS drill bits: 3.3mm, 4.0mm, 5.1mm, 6.4mm, 10mm
- Soldering iron
- Electric glue gun
- Handsaw for metal
Wrenches & screwdrivers
- 5.5mm (for M3)
- 10mm (form M6)
- Plain screwdriver for the wire nuts
- Philips screwdriver if some of the bolts are Philips head
- Appropriate Allen wrenches if some of the bolts are Allen head.
Contact, support: Clock
on the Internet Relay Chat.© 1998-2016 Karel ‘Clock’ Kulhavý et al..