Ronja Twibright Labs

About Ronja Hertz

Ronja Hertz is a frequency generator suitable for testing Ronja 10M Transmitter. It generates 1, 5, 10 or 20MHz square signal.

Interfaces

On the top of the device there is a four terminal wire nut. Two right most wires (signed "+12V" and "GND" are connected to power supply. Two other wires (signed "OUT" and "GND") are connected directly to any Ronja 10M transmitter.

Frequency is selected with two switches.

Technical specifications

Output frequency1, 5, 10 or 20MHz (user selectable)
Output signal amplitude700mV pp
Output impedance75 Ohm
Operating ambient temperature0...+55 degC
Power consumptionmax. 55mA @ 12V
An expected information missing here?