Mounting Ronja Wall Perpendicular Console

You are to mount two identical consoles. Choose suitable places so that:

140mmx140mm square is clear on the masonry or concrete surface where you want to mount
Four 12mm holes can be drilled in the masonry or concrete in a square of 100x100mm
The flange will sit flat and will not sit on cracking protrusions
The holes will not be between bricks or on edges of any disparities
There will be enough space to mount the optical heads in the required direction, for cables and so on

Drill the 12mm holes in the wall, using the 12mm masonry drill. The centres of the holes will form two 100mm squares. Attach each hole of the console using the 8mm bolt with M8 steel washer. Tighten down firmly. Only now tighten down the M8 bolts holding the consoles together firmly.

Ground the console using the lightning rod clamps and lightning rod conductor to a suitable lightning conductor or grounded roof tin nearby. Check with a multimeter that the connection has less than 0.2 Ohm resistance.