Material needed for Ronja Wall Parallel Console
Where do I get the material?
Steelworks
Sections
- 1 pc. 500mm of 50mmx38mm rolled steel U section (DIN 1026, ČSN 42 5570)
- 2pcs. 200mm of 100x100x6mm or 100x100x8mmrolled steel L section (DIN 1028, CSN 42 5541, EN 57 10056)
- 3pcs. (30+50-10)mm of 15x(15+25-5) hollow or full metal square or
oblong profile
Nuts and bolts
- 2pcs. bolt M8x35, galvanized, hex or Allen head
- 2pcs. bolt M10x50, galvanized, hex or Allen head
- 4pcs. bolt 8mm dia. for 12mm wall plug, hex or Allen head
- 2pcs. nut M8, galvanized
- 2pcs. nut M10, galvanized
- 4pcs. washer M8 (8.4mm), galvanized
- 2pcs. toothed spring washer M10 (10.5mm), galvanized
- 4pcs. wall plug, 12mm, plastic
Ironmonger's
- Rough emery paper for grinding off rust
Chemistry
- Primer paint, anti-corrosive, outdoor, any colour, water-soluble
- Top paint, white colour, water-soluble
- Detergent and hot water for removing fat
ELectrician
- Lightning rod clamp plate/wire
- Lightning rod clamp wire/wire or plate/wire (depends on available
grounding point)
- Lightning rod conductor, as long as the distance between the console
and adjacent suitable grounding point
Contact, support: Clock
on the Internet Relay Chat.© 1998-2016 Karel ‘Clock’ Kulhavý et al..