Ronja Twibright Labs

About Ronja Wall Parallel Console

About Ronja Wall Parallel Console

This console is suitable for mounting on a wall where the beam will point from parallel to nearly perpendicular to the wall. Is unsuitable for places where high winds occur - this is a bug and it's repair is on the TODO list. For places where high winds may occur, use of perpendicular console is suggested.


The interface is a square 200x200mm, in which four 12mm holes in corners of a 160x160mm square are drilled into the masonry and plastic plugs inserted. The wall must be masonry. Wooden board or beam wall is not permitted. Plastic foam insulation must be removed. Bricks or plaster must not crumble. The interfaced building must not sway in wind or twist from thermal expansion comparably with the beam divergence.

An expected information missing here?