Tools needed for Ronja Parallel Welded Console
Measuring tools
- Ruler
- Tape measure
- Hard-metal tip stylus or awl
- Slide gauge (recommended).
- Square. Necessary only if you don't have accurate printer.
Working tools
- Steel welding machine for 1.5-4mm thickness
- Electric drill up to 12mm bit diameter.
If mounting on a concrete wall, a hammer drill.
- Masonry drill bit, 12mm
- HSS drill bits: (3.5+1.5-0.5)mm, 8.5mm, 10.5mm
- File
- Hammer
- Metal saw, if the sections parts are not bought cut to
size
Other
Wrenches
- 2 pcs. 17 mm wrench
- 2 pcs. 16mm wrench (they sometimes make the M10 hex head 16mm)
- 1pc. 6mm Allen wrench
Household items
- Floor washing bucket
(only if you are not using industrial coating)
- Floor washing brush or sponge
(only if you are not using industrial coating)
Contact, support: Clock
on the Internet Relay Chat.© 1998-2016 Karel ‘Clock’ Kulhavý et al..