Ronja Twibright Labs

About Ronja Wall Parallel Console

About Ronja Wall Parallel Console

This console is suitable for mounting on a wall where the beam will point from parallel to nearly perpendicular to the wall. You will need a welding machine to make it.


The interface is an equilateral triangle of 12mm holes. The triangle side is approx. 30cm. The 12mm holes are drilled into masonry and plastic plugs inserted. Wooded board or wooden beam is not permitted. Plastic foam insulation must be removed. Bricks or plaster must not crumble. The interfaced building must not sway in the wind or twist from thermal expansion comparably to the beam divergence.

An expected information missing here?