Tools needed for Ronja Mast Console
Measuring tools
- Ruler
- Tape measure
- Hard-metal tip stylus or awl
- Slide gauge (recommended).
- Square. Necessary only if you don't have accurate printer.
Working tools
- Electric drill up to 10.5mm drill bit diameter.
- Masonry drill bit, 12mm
- HSS drill bits: (3.5+1.5-0.5)mm, 8.5mm, 10.5mm
- File
- Hammer
- Metal saw
Other
Wrenches
- 2 pcs. 17 mm wrench
- 2 pcs. 16mm wrench (they sometimes make the M10 hex head 16mm)
Household items
- Floor washing bucket
- Floor washing brush or sponge
Contact, support: Clock
on the Internet Relay Chat.© 1998-2016 Karel ‘Clock’ Kulhavý et al..