Material needed for Ronja Mast Console
Where do I get the material?
Steelworks
Sections
- 1 pc. 160mm of 50mmx38mm rolled steel U section (DIN 1026, ČSN 42 5570)
- 1 pc. 260mm of 50mmx38mm rolled steel U section (DIN 1026, ČSN 42 5570)
Nuts and bolts
- 2pcs. thread bar M10 170mm long, galvanized
- 2pcs. bolt M10x40, galvanized, hex head
- 4pcs. nut M10, galvanized
- 6pcs. toothed spring washer M10 (10.5mm), galvanized
Ironmonger's
- Rough emery paper for grinding off rust and paint
Chemistry
- Primer paint, anti-corrosive, outdoor, any colour, water-soluble
- Top paint, white colour, water-soluble
- Detergent and hot water for removing fat
ELectrician
- Lightning rod clamp plate/wire
- Lightning rod clamp wire/wire or plate/wire (depends on available
grounding point)
- Lightning rod conductor, as long as the distance between the console
and adjacent suitable grounding point
Contact, support: Clock
on the Internet Relay Chat.© 1998-2016 Karel ‘Clock’ Kulhavý et al..