Tools needed for Ronja Wall Corner Console
Measuring tools
- Ruler
- Hard-metal tip stylus or awl
- Slide gauge (recommended)
- Square (recommended)
Working tools
- Electric drill up to 12mm drill bit diameter. If mounting on a concrete
wall, it must be a hammer drill.
- HSS drill bits: 4mm, 10.5mm
- Masonry drill bit, 12mm
Other
- Paintbrush (1.5'' wide optimum)
Contact, support: Clock
on the Internet Relay Chat.© 1998-2016 Karel ‘Clock’ Kulhavý et al..