Material needed for Ronja Wall Corner Console
Where do I get the material?
Steelworks
Sections
- 1 pc. 700mm of 50mmx38mm rolled steel U section (DIN 1026, ČSN 42 5570)
Nuts and bolts
- 2pcs. bolt M10x50, galvanized, hex or Allen head
- 3pcs. bolt 8mm dia. for 12mm wall plug, hex or allen head. Length
is length of the plug+38mm (thickness of attached object is 38mm)
- 2pcs. nut M10, galvanized
- 3pcs. washer M8 (8.4mm), galvanized
- 2pcs. square wedge washer for U sections, 11mm
- 2pcs. spring washer M10 (10.5mm), galvanized
- 3pcs. wall plug, 12mm, plastic
Ironmonger's
- Rough emery paper for grinding off rust
Chemistry
- Primer paint, anti-corrosive, outdoor, any colour, water-soluble
- Top paint, white colour, water-soluble
- Detergent and hot water for removing fat
ELectrician
- Lightning rod clamp plate/wire
- Lightning rod clamp wire/wire or plate/wire (depends on available
grounding point)
- Lightning rod conductor, as long as the distance between the console
and adjacent suitable grounding point
Contact, support: Clock
on the Internet Relay Chat.© 1998-2016 Karel ‘Clock’ Kulhavý et al..