Ronja Twibright Labs

About Ronja Wall Corner Console

This console is suitable for mounting Ronja onto a wall corner (1/4 of space occupied by wall and 3/4 by air). All horizon visible from the corner is reachable by the beam (the console has got no blind spots). Which side of the corner will the holder be mounted on is dependent on the direction of the beam.

Interface

The interface is a horizontal strip, 50mm high and 300mm long touching the corner. Inside the strip, there are three 12mm holes with plastic wall plugs. Two neighbouring holes' centres are spaced 100mm. The wall must be masonry. Wooden board or beam wall is not permitted. Plastic foam insulation must be removed. Bricks or plaster must not crumble. The interfaced building must not sway in wind or twist from thermal expansion comparably with the beam divergence.

An expected information missing here?