Tools needed for Ronja Chimney Console
- Tape measure
- Hard-metal tip stylus or awl
- Slide gauge (recommended).
- Square. Necessary only if you don't have accurate printer.
- Electric drill up to 10.5mm drill bit diameter.
- HSS drill bits: (3.5+1.5-0.5)mm, 5.4mm, 10.5mm
- Metal saw, if the sections parts are not bought cut to
- 0.5 inch paintbrush
- 1.5 inch paintbrush
- 2 pcs. 17 mm wrench
- 2 pcs. 16mm wrench (they sometimes make the M10 hex head 16mm)
- Floor washing bucket
- Floor washing brush or sponge