This console is suitable for mounting Ronja onto a rectangular chimney. It consists of two identical U-sections, each one holding one tubular head, and thread bars holding the sections around the chimney. The sections should not be parallel or near to parallel to the beam direction. The sample construction is designed for a 0.5x0.5m chimney. It can be made for a bigger or smaller chimney by extending or shortening the sections and/or thread bars. If the chimney is too big for one thread bars (they are usually being sold in 1m lengths), more thread bars can be joined together using union nut.
The interface is a horizontal strip, 50mm high and 500mm wide on both sides of a chimney.
Contact, support: Clock
on the Internet Relay Chat.© 1998-2016 Karel ‘Clock’ Kulhavý et al..