Measuring tools
- Ruler
- Hard-metal tip stylus or awl
- Slide gauge (recommended)
- Square (recommended)
Working tools
- 140mm of 20x20x3 steel L-section (as a helper for bending tin)
- 120mm of 20x20x3 steel L-section
- Electric drill up to 10.5mm drill bit diameter.
- HSS drill bits: 3.3mm, 4.3mm, 5.0mm, 8.5mm, 10.5mm
- Pistol for thermal glue or pistol for expressing silicone sealant
cartridges (if the sealant is in cartridges)
- Soldering iron
- Tin cutters
- Vice
Household stuff
- Fine-tip permanent waterproof marker for nonporous surfaces
- Scissors
Contact, support: Clock
on the Internet Relay Chat.© 1998-2016 Karel ‘Clock’ Kulhavý et al..