Where do I get the material?
Tin
- 200x220mm and 160x140mm pieces of 0.5-0.7mm tin-plated (galvanized)
steel tin
Nuts and bolts
- 5pcs. bolt, M3x15, galvanized, hex or Allen or cheese or Philips head.
Appropriate wrench (5.5mm for hex) or screwdriver.
- 10pcs. bolt M4x6, hex or Allen head, with thread to head. Appropriate wrench (7mm for hex).
- 5pcs. nut M3, galvanized. Appropriate wrench (5.5mm) or pliers.
- 5pcs. washer M3, galvanized.
- 10pcs. nut M4. Appropriate wrench (7mm).
- 1pc. toothed spring washer M3.
Ironmonger's
- Rough emery paper for grinding off rust
Chemistry
- Glue for sticking paper onto metal surface
- Thermal glue or silicone sealant
Electrician
- 4 meters of thin insulated wire (hard, not stranded) for short interconnections
within the airwire construction
![Gallery[587]](http://images.twibright.com/tns/lvl0/587.jpg)
Good thin wire is: 0.5mm^2 wire, UTP cable taken apart
(there are stranded and non-stranded UTP cables, only the non-stranded is usable).
- 4 meters of 1mm^2 insulated wire (hard, not stranded) for
long interconnections within the airwire construction
- 0.5 meter of 4mm^2 insulated copper wire (hard, not stranded)
- 20cm of double cable where each half is shielded stranded conductor with
solderable shield, or 40cm single.
Stationery
- Paper glue for sticking paper on nonporous surface (tin)
- Some paper stickers
Electronics
- Solder
rosin
flux
- 1x cable grommet 6mm
- 1x cable grommet 8mm
- The following electronic components
(separate partlists).
Use only new components, not desoldered ones:
| Device |
Package |
Value |
Quantity |
Order No. Distrelec |
Price Distrelec [CHF incl. VAT] |
Order No. GM |
Price GM [CZK incl. VAT] |
|---|
| |
|
|
|
www.distrelec.com |
|
www.gme.cz |
|
|---|
| 1N4448 | | | 9 | 603020 |
0.22 |
220-004 |
1 |
| 1N5408 | | | 1 | 600210 |
0.75 |
221-001 |
1.9 |
| 2N3904 | | | 3 | 612753 |
0.43 |
215-003 |
1.5 |
| 74HC00 | DIL | | 1 | 647652 |
0.48 |
425-001 |
8 |
| 74HC04 | DIL | | 1 | 647658 |
0.43 |
425-004 |
8 |
| 74HC14 | DIL | | 1 | 647698 |
0.43 |
425-009 |
4 |
| 74HC32 | DIL | | 1 | 647782 |
0.48 |
425-014 |
5 |
| 74HC74 | DIL | | 1 | 647902 |
0.43 |
425-019 |
3.7 |
| 74HCT132 | DIL | | 1 | 649690 |
0.75 |
426-026 |
4 |
| 74HCT14 | DIL | | 1 | 649660 |
0.65 |
426-008 |
4 |
| CAPACITOR | ceramic 50V | 27p_5%_NPO_dielectric | 1 | |
|
972-017 |
2 |
| CAPACITOR | ceramic 50V | 39p_5%_NPO_dielectric | 1 | |
|
972-032 |
2 |
| CAPACITOR | ceramic 50V | 47p_5%_NPO_dielectric | 1 | 831573 |
0.59 |
906-081 |
2.5 |
| CAPACITOR | ceramic 50V | 68p_5%_NPO_dielectric | 3 | 831574 |
0.65 |
906-082 |
2.5 |
| CAPACITOR | ceramic 50V | 1n | 13 | 830258 |
0.32 |
120-168 |
1 |
| CAPACITOR | ceramic 50V | 2.2n | 1 | 830348 |
0.32 |
120-046 |
1.5 |
| CAPACITOR | ceramic 50V | 3.3n | 1 | 830264 |
0.32 |
120-048 |
1.5 |
| CAPACITOR | ceramic 50V | 10n | 3 | 831591 |
0.48 |
120-251 |
1.5 |
| CAPACITOR | ceramic 50V | 22n | 2 | 830300 |
0.27 |
120-055 |
2 |
| CAPACITOR | ceramic 50V | 33n | 1 | 830278 |
0.27 |
972-028 |
1.5 |
| CAPACITOR | ceramic 50V | 47n | 2 | 830302 |
0.38 |
120-058 |
2 |
| CAPACITOR | ceramic 50V | 100n | 11 | 830284 |
0.32 |
120-060 |
1 |
| CAPACITOR | ceramic 50V | 220n | 3 | 831616 |
0.75 |
120-062 |
3 |
| CAPACITOR | ceramic 50V | 330n | 1 | 830290 |
0.91 |
905-139 |
4.3 |
| CRYSTAL_OSCILLATOR | DIL 14 | 4MHz | 1 | 335004 |
3.12 |
132-025 |
95 |
| D-SUB_CONNECTOR | male with cover | 15-pole 2-row | 1 | |
|
801-004 and 801-074 |
16 |
| LED | 5mm diffuse | Green | 1 | 251536 |
0.43 |
511-060 |
2.5 |
| LED | 5mm diffuse | Red | 1 | 251534 |
0.7 |
511-409 |
1 |
| LED | 5mm diffuse | Yellow | 1 | 251532 |
0.43 |
511-091 |
1.2 |
| LM7805 | | | 1 | 647310 |
0.86 |
330-001 |
7.5 |
| POLARIZED_CAPACITOR | | 22u/10V | 1 | 800570 |
0.75 |
123-067 |
1 |
| POLARIZED_CAPACITOR | | 100u/16V | 1 | 802300 |
0.7 |
123-476 |
1 |
| RESISTOR | 250mW pref. metallic | 3.3 | 1 | 714012 |
0.22 |
110-013 |
1 |
| RESISTOR | 250mW pref. metallic | 39 | 2 | 714047 |
0.19 |
110-039 |
1 |
| RESISTOR | 250mW pref. metallic | 47 | 3 | 711649 |
0.11 |
110-041 |
1 |
| RESISTOR | 250mW pref. metallic | 82 | 1 | 714055 |
0.15 |
110-047 |
1 |
| RESISTOR | 250mW pref. metallic | 100 | 4 | 714057 |
0.15 |
110-049 |
1 |
| RESISTOR | 250mW pref. metallic | 220 | 3 | 714073 |
0.14 |
110-057 |
1 |
| RESISTOR | 250mW pref. metallic | 270 | 2 | 714075 |
0.14 |
110-059 |
1 |
| RESISTOR | 250mW pref. metallic | 330 | 3 | 714077 |
0.14 |
110-061 |
1 |
| RESISTOR | 250mW pref. metallic | 470 | 2 | 714081 |
0.14 |
110-065 |
1 |
| RESISTOR | 250mW pref. metallic | 1k | 1 | 714089 |
0.14 |
110-073 |
1 |
| RESISTOR | 250mW pref. metallic | 1.8k_1% | 1 | 711699 |
0.11 |
110-079 |
1 |
| RESISTOR | 250mW pref. metallic | 2.2k_1% | 3 | 711702 |
0.11 |
110-081 |
1 |
| RESISTOR | 250mW pref. metallic | 3.3k | 1 | 711706 |
0.11 |
110-085 |
1 |
| RESISTOR | 250mW pref. metallic | 6.2k_1% | 1 | 711713 |
0.11 |
110-092 |
1 |
| RESISTOR | 250mW pref. metallic | 15k | 1 | 711731 |
0.11 |
110-101 |
1 |
| RESISTOR | 250mW pref. metallic | 24k_1% | 1 | 711737 |
0.11 |
110-106 |
1 |
| RESISTOR | 250mW pref. metallic | 100k | 3 | 714148 |
0.14 |
110-121 |
1 |
| RESISTOR | 250mW pref. metallic | 120k | 1 | 714153 |
0.14 |
110-123 |
1 |
| Total: |
106 |
Price Distrelec [CHF incl. VAT] |
"36.35" |
Price GM [CZK incl. VAT] |
"279.6" |
| Equivalents (most preferred come first) |
| 1N4448 | 1N4148 |
| 74HCT14 | 74HCT132 provided that:
- Connect pins 2, 14, 5, 9, 13 of the replacement 74HCT132 together
- Use different pin numbers:
| pin number on 74HCT14 | pin number on replacement 74HCT132
| | 1 | 1
| | 2 | 3
| | 3 | 4
| | 4 | 6
| | 5 | 10
| | 6 | 8
| | 7 | 7
| | 8 | 11
| | 9 | 12
| | 10 | ignore
| | 11 | ignore
| | 12 | ignore
| | 13 | ignore
| | 14 | 14
|
|
| 74HC74 | 74HCT74
|
| 74HC... | SN74HC..., MM74HC... |
| 2N3904 | MMBT3904 (2N3904 in SOT-23 case), PZT3904 (2N3904 in SOT-223 case), 2N2369A, 2N2369, 2N2222, BC547C, BC547B, BC547A, BC547 |
| 10_turns_on_8mm | Make from insulated copper wire of 0.5mm^2...1mm^2 crosssection. Can be replaced with 1uH factory-made coil. However must be rated on at least the current the power source gives when shorted.
|
Home
- A rag for cleaning soldering iron
Contact, support: Clock
on the Internet Relay Chat.© 1998-2016 Karel ‘Clock’ Kulhavý et al..