Measuring tools
- Ruler
- Hard-metal tip stylus or awl
- Slide gauge (only recommended)
- Square (only recommended)
Working tools
- Electric drill with chuck that can hold 6mm diameter drill bit
- HSS drill bits: 3.2mm, 6mm
- Soldering iron
- Tin shears
Wrenches & screwdrivers
- 5.5mm (for M3)
- Plain screwdriver for the wire nuts (size according to your particular
wire nuts)
- Philips screwdriver if some of the bolts are Philips head
Contact, support: Clock
on the Internet Relay Chat.© 1998-2016 Karel ‘Clock’ Kulhavý et al..